IPS E-Max CAD CEREC INLAB IMPLANT MO A14 (L)

More than 10 years of continuous quality tests show that IPS E.MAX CAD offers biaxial flexion resistance of 530 MPA^[2]. In addition, it presents resistance to the propagation of cracks of 2.11 MPa M^1/2[3]. This combination of high mechanical values ​​is particularly sought after in mini-invasive dentistry.

• Wreaths
• Inlays
• Onlays, tops table, partial crowns
• Facets
• Bridges three elements until the second premolar as a final pillar
• Implant-ported hybrid restorations (anatomical implant pillars, crowned crowns directly on implants)

The four degrees of translucidity, combined with the A-D, Bleach and Impulse shades, provide excellent aesthetic results.

The IPS E.max CAD blocks are available in a wide variety of sizes, colors and transluid levels*. This increases your flexibility, since you always have an appropriate block at your disposal in the desired shade. The excellent correspondence of colors thanks to a full range of translucent shades and levels offers optimal aesthetic.

There is a block suitable for each patient:

• IPS E.MAX CAD HT (High translucidity) - The block for the least invasive restorations
• IPS E.MAX CAD MT (average translucent) - The block dedicated to particularly bright restorations
• IPS E.MAX CAD LT (Low translucent) - The versatile block
• IPS E.MAX CAD MO (medium opacity) - The classic block for laminate restorations
• IPS E.MAX CAD I (Impulse) - The opalescent block.