Peek disc juvora 98 mm

PEEK JUVORA disc, high performance polymer - 98 mm.

High performance polymer alternative to metal for dental prostheses.

Juvora, PEEK disc suitable for CAD-CAM manufacturing, can be machined wet or dry.

Innovlanc® Medical PEEK Juvora discs, homogeneous industrial mills with high mesh in pure PEEK Optima® LT1 Biocompatible.

• Production of removable metal restorations.
• Removable constructions on implants.
• Glued/cemented reinforcements.
• Juvora Polymère Peek Optima® LT1, successfully used for many years in orthopedics, vascular surgery and anaplasty.
• Juvora Peek Medical is configured for the permanent stay in the mouth.
• Peek Juvora is suitable for replacing structures that have so far been carried out either with alloys or with zirconium dioxide.
• Material that can be combined with itself or with other non-metallic and metallic materials by bonding or veneer.
• High rupture resistance and rigidity.

Juvora Peek Medical, behavior and density similar to that of the bone.

• Classification as a body-similar (bionic).
• Light structures and pleasant to wear.
• No hot or cold sensations, chemically inert.
• No reciprocal electrochemical effect with other materials in the mouth.
• Low friction coefficient, excellent abrasion resistance.
• Magicing effect and very good resistance to erosion, perfectly indicated for chronic bruxism.

Polyether ether ketone - pure, without additional additives (such as color pigments, zirconium dioxide, nano -glass or glass fibers).

• Removable and under certain conditions.
• Reentive restorations ("model casting"), telescopic structures.
• Intermediate friction caps.
• Fine prosthetic bases (eg total prosthesis).
• Internal monobloc bases on primary parts in zirconium dioxide in case of restorations of coverage prostheses.
• Fixing structures.
• Supra constructions screwed and implant-ported. 
• Fully anatomical chewing areas (ideally adapted to bruxism).

PEEK is a partially crystalline high performance polymer. This material has very high rigidity with low elasticity.

• With an appropriate construction, the PEEK has high shock resistance.
• Characteristics must be taken into account for all constructions.
• Too fine constructions would promote too high residual elasticity with risk of cracks in the transition between material and finishing resins.
• Similar edges, coarse dumblacking must be avoided.
• The machining must have round edges with soft transitions.

For information, the dimension of a PEEK machining must be around 20 to 30% higher than that of a metal.

Juvora disk Peek - Indications.

• Complete and partial removable dentures.
• Dental prostheses on implant implants and bars.
• Anterior and posterior crowns.
• Posterior bridges 3 units (maximum 1 inter).